How to Assemble: SF-RB4806 Magnetic Recumbent Exercise Bike

How to Assemble: SF-RB4806 Magnetic Recumbent Exercise Bike

ASSEMBLY GUIDE:

OVERVIEW:

This video will show you how to assemble your Sunny Health & Fitness Magnetic Recumbent Exercise Bike SF-RB4806. You will find the necessary tools, hardware package, and user manual included in your package.

We value your experience using Sunny Health & Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or (626) 968-1000.

Step 1A: Attach rear stabilizer to the main frame
Step 1B: Attach front stabilizer to the main frame
Step 1C: Align left pedal with left crank; Tighten counter-clockwise
Step 1D: Align right pedal with right crank; Tighten clockwise
Step 2A: Remove preassembled screws from the main frame
Step 2B: Connect sensor wire with sensor wire extension; Connect pulse wire with pulse wire extension
Step 2C: Pull lower wire through side hole of main frame
Step 2D: Attach handlebar post to main frame using preassembled screws
NOTE: Ensure the tension control knob is at level 8 when connecting to the lower wire.
Step 2E: Remove bolt from tension control knob
Step 2F: Connect tension control knob with lower wire
Step 2G: Attach tension control knob to handlebar post using preassembled bolt
Step 3A: Remove bolts from handlebar post
Step 3B: Attach front handlebar to handlebar post using preassembled bolts
Step 3C: Remove screws from monitor
Step 3D: Connect monitor wires with sensor wire extension and pulse wire extension
Step 3E: Push wires into handlebar post
Step 3F: Attach monitor to handlebar post with preassembled screws
Step 4A: Remove bolts from backrest frame support
Step 4B: Attach backrest frame to backrest frame support using preassembled screws
Step 4C: Attach rear handlebar to backrest frame
Step 4D: Attach handle pulse wire with pulse wire
Step 4E: Remove bolts from adjusted handlebar
Step 4F: Attach adjusted handlebar to clamp shaft using preassembled bolts
Step 4G: Remove preassembled bolts from seat cushion
Step 4H: Attach seat cushion to backrest frame using preassembled bolts
Step 4I: Attach backrest cushion to backrest frame using preassembled bolts

END ASSEMBLY GUIDE

Recommended Products:


Leave a comment

Please note, comments must be approved before they are published